Price | 253.6 |
---|---|
Discounted Amount | $253.60 ($253.60 discount) |
Discounted Amount | Total Discounted Amount KRW (Mobile Purchase Discount KRW ) |
Reward Points | 1% |
Shipping Method | Parcel Service |
Shipping Cost | International Shipping Fee |
Description |
구매방법 | |
---|---|
배송주기 |
Shipping | |
---|---|
Handle Type | |
Quantity |
|
Product Info | Product | Remove |
---|
Discounted amount of your subtotal will appear when you place your orders.
Checkout
No. | DESCRIPTION | ?MATERIAL |
---|---|---|
1 | CAP | AL6061 |
2 | Socket Set Screw | SCM435 |
3 | NUT | STS304 |
4 | HOUSING 1 | STS304 |
5 | SPRING GUIDE 1 | STS304 |
6 | SPRING | Carbon Steel |
7 | SPRING GUIDE 2 | STS304 |
8 | HOUSING 2 | STS316CW |
9 | SEAT GLAND | STS316CW |
10 | SUS SEAL | STS316CW |
11 | O-RING | VIton |
12 | GLASS SEAL | GLASS TEFLON |
13 | STEM GUIDE | STS316CW |
14 | STEM | STS630 |
15 | SEAT | PEEK |
16 | O-RING | Viton |
Protect the system from overpressure by venting when the pressure exceeds a set value.
Easy to set pressure with using bolt on the top . Pressure range : 1,000psi ~ 10,000psi Setting Pressure tolerance : ±8% Max working temperature : -20℃ ~65℃ (NYLON) / -20℃~160℃ (PTFE) Inlet port : 1/4" NPT , H2004 Outlet port : 1/4" NPT Orifice size : ø1.8 possible to connect many other types with Adapter Provide long life cycle with using spring and soft seat. |
Feature | RV10FAS Type | RV20FAS Type |
---|---|---|
Pressure Range (PSIG) | 1,000 ~ 10,000 | 10,000 ~ 20,000 |
Inlet Port | 1/4" NPT | H2004 |
Outlet Port | 1/4" NPT | |
Orifice Size | 1.8mm | |
CV | 0.12 | |
Packing Material | PEEK | |
O-ring Material | Viton | |
Max working temperature | -20℃ ~65℃ (NYLON) / -20℃~160℃ | |
Usage size adjustment a ranch with six angles | 5mm Use a ranch with six angles | 6mm Use a ranch with six angles |
Adjust dimension tolerance ±% | ±8% | |
Useable area | Water |
To protect the equipment form the over pressure.
In the system which control the overpressure by heat expansion. When the low drain rates is not the problem point in high pressure. When the system requires “bubble tight’ sealing. |
Pressure ~ below 1,000psi.
If the system requires to increase venting or drain rates when the pressure rises. If the back pressure occurs at the drain port. High corrosive fluids, liquid N2 or any other fluids that defect the valves. |
High pressure fluid handling components for the chemical, petrol chemical, water-jet, research and oil and gas industries. |
Cone and thread connection to prevent gas or liquid leaking. |
Our products generally are produced with stainless steel materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, Inconel, Titanium, Nickel. |
You can choose the handle type. Please leave the desired type in the requirements section when ordering the product. |
① CAP - Basic delivery ② Hex Knob Type ③ Handle type If the option is not selected, it is shipped as a CAP type. |
There are no posts to show
There are no posts to show