Price | 560 |
---|---|
Discounted Amount | $560.00 ($560.00 discount) |
Discounted Amount | Total Discounted Amount KRW (Mobile Purchase Discount KRW ) |
Reward Points | 1% |
Shipping Method | Parcel Service |
Shipping Cost | International Shipping Fee |
Description |
구매방법 | |
---|---|
배송주기 |
Shipping | |
---|---|
Quantity |
|
Product Info | Product | Remove |
---|
Discounted amount of your subtotal will appear when you place your orders.
Checkout
No. | DESCRIPTION | MATERIAL |
---|---|---|
1 | CAP | AL6061 |
2 | SUS NUT | STS304 |
3 | SPRING GUIDE 1 | STS304 |
4 | HOUSING | STS304 |
5 | BODY | STS316CW |
6 | SPRING GUIDE 2 | STS304 |
7 | STEM | STS630 |
8 | SEAT | PEEK |
9 | STEM GUIDE | STS316CW |
10 | BOTTOM CONNECTOR | STS316CW |
Pressure range : 1,000psi ~ 15,000psi Setting Pressure tolerance : ±8% Max working temperature : -20℃ ~65℃ (NYLON) / -20℃~160℃ (PTFE) Inlet port : 1/2"NPT Orifice size : ø 6.3 Outlet port : 1/2" NPT Standard Material : SUS 계열 O-ring material on piston : Viton Max operating temperature : 160℃ possible to connect many other types with Adapter Safe sealing by using PEEK stem Supply with set pressure (Customer requirement) with sealing tag. (Note, A/S is not available if the sealing tag is defected or removed) |
Feature | RV15PPS08N | RV20PPS09 |
---|---|---|
Pressure Range (PSIG) | 1,000 ~ 15,000 | 1,000 ~ 20,000 |
Inlet Port | 1/2" NPT | H2009 (9/16") |
Outlet Port | 1/2" NPT | |
Orifice Size | ø 6.3 | |
Packing Material | PEEK | |
O-ring Material | Viton | |
Max working temperature | -20℃ ~ 160℃ | |
Usage size adjustment a ranch with six angles | 6mm Use a ranch with six angles | |
Adjust dimension tolerance ±% | ±8% | |
Useable area | Water, Gas |
To protect the equipment form the over pressure. In the system which control the overpressure by heat expansion. When the low drain rates is not the problem point in high pressure. When the system requires “bubble tight’ sealing. |
Pressure ~ below 1,000psi. If the back pressure occurs at the drain port. Corrosive liquids or gases that can damage the valve High corrosive fluids, liquid N2 or any other fluids that defect the valves. |
- The pressure of inlet port effects set pressure. - Turn right to increase set pressure. - Turn left to decrease set pressure. |
High pressure fluid handling components for the chemical, petrol chemical, water-jet, research and oil and gas industries. |
The soft seat and large orifice size ensure stable ejection. |
Our products generally are produced with stainless steel materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, Inconel, Titanium, Nickel. |
There are no posts to show
There are no posts to show